logo
 
Co ANh  EnglishViệt Nam Tiếng Việt
Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com
MOTOSCAN - BEST SELECTION FOR REPAIRING SCOOTER & MOTORCYCLES IN ASIA COUNTRIES!
MOTOSCAN - SCANNER FOR PGM-FI/FI MOTORCYCLES & SCOOTERS
Latest version 4.8P and 5.8P icon updated 21/12/2016 added new features:
• Update new lines and live data of SYM brand: SHARK MINI 125 EFI, SHARK MINI 125 SPORT, ATTILA-V SMART IDLE, ELIZABETH SMART IDLE, VENUS 125 CBS, VENUS 125 SMART IDLE, VENUS 125 EFI
• Update new lines of YAMAHA brand: JANUS, TFX, NVX 155
• Add programming function and get out immobilizer ID code for PIAGGIO/VESPA (it also support GILERA, APRILIA, DERBI, PEUGEOT, which use similar ECMs) that ECM types: MIU1, MIU2, MIU4 và IC: , AC13I, AC191, AC19I, AC20I, AC21I, AC23I, AC24I, AC25I, AC27I, AC2I, AC32I, AC5I, AC8I, ACI600, AC601, ACI602, ACI603, ACI604, ACI605, ACI606, ACII

• Program odometer correction for HONDA WINNER 150
• Optimize menu list, live data for HONDA WINNER and protocol communication for YAMAHA brand
 Video introduce MOTOSCAN
(Notes: MOTOSCAN has English version) 
Product code: MT0001
● Origin: DTDAUTO
● Availability: In stock
● Rate:Đánh giá
 
Options:

(Common shipping: 99$US)
 
 
INTRODUCTION
 
- MOTOSCAN is a small motorcycle & Scooter scanner. It researched and manufactured by DTDAuto Technology Team, Institute of Physics, Vietnam Academy of Science and Technology since 2013.
- This is equipment used for the repair workshops and motorcycle vocational training that identify fault electrical of PGM-FI/ FI motorcycles.
- MOTOSCAN was friend with the technicians in the repair workshop to identify fault, repair fault, measure and look up of electrical circuit diagram and standard specification for most small motorcycles and scooters in Asia market.
- Since MOTOSCAN 5.8 has able communicated to the electrical MOTOBOX accessory to perform more advanced functions, especially for professional repairer as correct odometer value, ECU reprogramming, simulate most ECU signals ...
- MOTOSCAN 5.8 has supported advanced function that used diagnosis solution by analyzing auto data. It can find hard faults that MIL lamp does not indicate such as: Idling Stop mode trouble, over idle speed, more fuel consumption, weak engine, hard start and mechanical faults that common diagnostic tools cannot execute.
- Support programming, adjusting and setting parameters in ECU as electronic key programming, zero point programming of TPS, and air/fuel ratio programming, idle speed and pulse bandwidth adjustment to control fuel injection vv... 
- Support look up information as the ECM version, MOTOBOX version and sync with a MOTODATA software on the computer to look up electrical circuit diagrams, standard specifications and suggest repair is detail.
- Equipment designed as the handheld, good quality, low cost and suitable for small and medium repair workshop.

OPTIONAL MODELS
 
OPTIONS MODEL LAST VERSION APPLICATION  PRICES
SINGLE MODE 4H  4.8P All HONDA PGM-FI/FI motorcycles 238 USD 
4Y  4.8P All YAMAHA PGM-FI/FI motorcycles 238 USD 
4S  4.8P All SYM PGM-FI/FI motorcycles 238 USD 
DOUBLE MODE 4HY  4.8P All HONDA, YAMAHA PGM-FI/FI motorcycles 333 USD
4HS  4.8P All HONDA, SYM PGM-FI/FI motorcycles 333 USD
MULTI MODE 4M  4.8P All HONDA, YAMAHA, SYM, SUZUKI PGM-FI/FI motorcycles 476 USD 
FULL MODE 5.8P All PIAGGIO/VESPA (it also support GILERA, APRILIA, DERBI, PEUGEOT, which use  similar ECMs),
 HONDA, YAMAHA, SYM, SUZUKI, KYMCO 
PGM-FI/FI motorcycles
667 USD 
MOTOBOX ACCESSORY   1.3P All PIAGGIO/VESPA (it also support GILERA, APRILIA, DERBI, PEUGEOT, which use similar ECMs),
HONDA, YAMAHA, SYM, SUZUKI, KYMCO 
PGM-FI/FI motorcycles
323 USD 
Note: if you buy a single mode or double mode then you can upgrade it to multi mode and full mode via Internet
 
FUNCTION LIST
FUNCTION 1: FIND MALFUNCTION 
       1.1. Read, clear fault codes stored in ECU
       1.2. Find complex faults that MIL lamp does not indicate include such as:
              -
Diagnose faults by the automatic data analyzing and interviewing the technicians
             + Can’t start engine
             + Idling stop fault
             + Fuel consumption
             + Starter is not work
             + Random acceleration
             + Constant acceleration
             + Idling not work
             + Hard to start engine
             + Weak engine
             + Injector mechanical fault
             + Dirty Air filter*
             + Exhaust pipe block*
             + Air hole dirty/block of MAP sensor/Throttle*
             + Intake manifold leak*
           - Diagnose faults by analyzing the engine live data and activate the actuators
             + Voltage and open angle of throttle position sensor (TPS)
             + Voltage and value of intake air temperature sensor (IAT)
             + Voltage and value of manifold air pressure sensor (MAP)
             + Voltage and value of engine temperature sensor (ECT)
             + Voltage and value of oxygen sensor (O2S)
             + Value of atmospheric pressure sensor
             + Engine speed (CKP/ NE)
             + Vehicle speed (VSS)
             + Status of fuel pump
             + Ignition timing advance (ISA)
             + Fuel injection time (Ti)
             + Starter signal (STP)
             + Status signal of side stand switch (SSTAND-SW)
             + Status Hall sensor
             + Evaporative purge cut solenoid valve output signal (PCS)
             + Output signal active starter relay (ON/OFF)
             + Output signal active PCV
             + Output signal active IACV
             + Output signal active MIL
             + SCS input signal status (service check signal)
             + Open state of step motor (IACV)
             + State of heater of O2 sensor
             + State of brake switch
             + State of Start & Stop indicate lamp
             + State of Star t& Stop mode button
             + State of start button
             + State of pre-positioning
             + Status of direction sensor
             + Status of oil minimum pressure sensor
             + Engine stop command from DSP
             + Battery voltage (BATT)
             + Battery current
             + Short term fuel trim in closed loop
             + Environmental revision coefficient in closed loop
             + Fault code and total fault codes
             + And other parameters vv...
            - Activate and reset the actuators: Fuel pump, injector, ignition coil, IACV, O2 heater, pump, blower, head lamp, MIL warning lamp, Immobilizer lamp, Start&Stop lamp, engine oil pressure warning lamp, reset pre-positioning of crankshaft  ...

FUNCTION 2: REPAIR FIRMWARE ERROR & CALIBRATION 
          2.1. Programming key immobilizer and get out immobilizer ID code for PIAGGIO/VESPA (it also support GILERA, APRILIA, DERBI, PEUGEOT, which use similar ECMs) that ECM types: AC13I, AC191, AC19I, AC20I, AC21I, AC23I, AC24I, AC25I, AC27I, AC32I, AC5I, AC8I, ACI600, AC601, ACI602, ACI603, ACI604, ACI605, ACI606, ACII, MIU1, MIU2, MIU G3/RIU1, MIU4, PGN04/PGS02/PGT01 
              Reset immobilizer, register new key when lost all of the keys, register additional keys
          2.2. Correct and adjust value of digital odometer of HONDA, YAMAHA (ODO) **
              Edit, decode odometer data and convert information automatically in EEPROM
          2.3. Programming ECM firmware ** for:
                 - HONDA: AIR BALDE 125, LEAD 125, SH MODE, VISION 110, VISION ESP*
                
- PIAGGIO/VESPA (it also support GILERA, APRILIA, DERBI, PEUGEOT, which use similar ECMs):  ECM types are AC19I/AC20I/AC24I/AC25I/ AC27I/AC32I, MIU G3/RIU1 and ECM PGN04/PGS02/PGT01 and PGQ16*

              Initialize and repair data errors, upgrade the versions of MCU, EEPROM
          2.4. Calibrate and set control parameters in the ECM:
              - Calibrate air/fuel ratio (AFR): YAMAHA, PIAGGIO/VESPA (it also support GILERA, APRILIA, DERBI, PEUGEOT, which use similar ECMs), SYM
              - Reset to manufacturer value of ECM: HONDA, YAMAHA, PIAGGIO/VESPA (it also support GILERA, APRILIA, DERBI, PEUGEOT, which use similar ECMs)
              - Offset zero point value and set range of throttle position sensor for PIAGGIO/VESPA (it also support GILERA, APRILIA, DERBI, PEUGEOT, which use similar ECMs)
              - Reset IACV: HONDA, YAMAHA, PIAGGIO/VESPA (it also support GILERA, APRILIA, DERBI, PEUGEOT, which use similar ECMs), KYMCO
              - Adjust pulse band width to control fuel injectors (Ti) and idle speed: YAMAHA, SYM
              - Create new and repair data errors, upgrade the version MCU, EEPROM

FUNCTION 3: SPECIALIZED MEASURE TOOL
          3.1. Fast measure and assess capacity, quality of battery      
          3.2. Reviewed charging status and rated the quality of the generator, regulator      
          3.3. Measure the air/fuel ratio (A/F) to assess the instantaneous fuel consumption      
          3.4. Emulate the signals on motorcycle for fault diagnosis, ECU hardware repair **

FUNCTION 4: INFORMATION 
          4.1. Show the current ECM firmware version      
          4.2. Look up electrical wiring diagram: principle diagram, schematic assembly and specified conditions      
          4.3. Look up the OBD fault codes, specifications, repairing suggestion      
          4.4. Look up the process assembly, repair, maintenance mechanic  
          4.5. Manage repair workshop: customer, financial, store, treasury, employees
          4.6. Update version of data software and firmware via Internet
 
NOTES:
- The advanced functions with an asterisk (*), will appear on the next version
- The advanced functions with an asterisk (**), you must purchase additional MOTOBOX
 
 
ADDRESS & APPLICATION RANGE
 
 
- Diagnostic scanner in motorcycle repairing workshop and equipment and trainers for technical vocation training
- A semi-finished products connect to trainer for electronic injection & ignition system of PGM-FI motorcycles
- MOTOSCAN used to read, clear fault codes, show live data, active actuators, repair firmware and immobilizer, lookup content of fault codes, suggesting repair for most small motorcycles of PIAGGIO, HONDA, YAMAHA, SUZUKI, SYM, KYMCO manufacturers use PGM-FI/FI system such as:
Notes: Models of motorcycles can vary according to country, models type don't have as below can connect to MOTOSCAN if have same ECM.
1. PIAGGIO          
VESPA LX VESPA PRIMAVERA VESPA S/S3V VESPA SPRINT VESPA GTS VESPA LT3V
   
VESPA LXV LIBERTY FLY BEVERLY MEDLEY   
           
2. HONDA          
LEAD 110 LEAD 125 AIRBLADE FI FUTURE NEO FI FUTURE X FI FUTURE 125 FI
PCX VISION WAVE RSX FI AT WAVE RSX FI SH125i SH150i
SH 125 ESP SH 150 ESP SH MODE SH 300I SCR MSX 125
PS WINNER  WAVE 110-I WAVE 125-I CLICK-I SCOOPY-I
           
3. SUZUKI          
HAYATE 125 VIVA 115 UA 125T GZ150-A IMPLUSE THUNDER 150
         
EN 150-A          
4. YAMAHA          
CUXI JANUS JUPITER GRAVITA JUPITER FI RC LUVIAS FI LUVIAS GTX FI
NOZZA NOZZA LIMITED NOUVO LX NOUVO SX RC NOUVO SX STD
NOUVO SX GP
SIRIUS FI GRANDE DULUXE GRANDE STD NVX 155 FZ1 FAZER FZ1 150I
 
YBR YZF FZ1 150I  GP FZ-S TFX  
5. SYM          
POWER  PASSING  ELIZABETH EFI ELIZABETH SMART JOYRIDE SHARK 125
         
VENUS EFI          
           
6. KYMCO          
JOCKEY FI LIKE FI MANY MACAROL MANY FI  PEOPLE 16 FI PEOPLE S FI
           
The next version will update more data type of motorcycles.
 
ADVANTAGE
 
- In-depth features, application range compatible most small motorcycles and scooters in Asia market
- A safe and convenient solution support both MIL and K-Line protocol
- Simple operation with keypad direct on handhelds (without computer)
- Equipment has integrate compact, design beautiful, professional, high strength mechanics
- Effective, fast, accurate, reliable, detailed
- Lookup more detail information for repairs by the MOTODATA software on computers
- Technical support consultant directly from manufacturer by SMS thought the Skype, Yahoo, WhatsApp, Zalo, Email, Teamviewer
- Update via Internet
- 12 months warranty and maintenance as required
- Low price
 



MotoScan interface for initial screen MotoScan interface for list of motorcycles MotoScan interface for list of motorcycles



MotoScan interface for function selection MotoScan interface for protocol selection MotoScan interface for function selection
 


MotoScan interface for function selection MotoScan interface for function selection MotoScan interface for function selection
 

MotoScan interface for content of fault code MotoScan interface for actuator activation MotoScan interface for actuator activation
MotoScan interface for advanced diagnostic MotoScan interface for advanced diagnostic MotoScan interface for advanced diagnostic



MotoScan interface for key programming  MotoScan interface for checking
quality of battery
MotoScan interface for checking
capacity of battery


MotoScan interface for checking
current charging status
MotoScan interface for checking air/fuel ratio MotoScan interface for adjusting air/fuel ratio



MotoScan interface for
zero point adjustment of TPS
MotoScan interface for displaying
ECM information
MotoScan interface for connecting MOTOBOX



MotoScan interface for pulse type selection MotoScan interface for CKP 11 teeth setting MotoScan interface for confirming
EEPRPOM type



MotoScan interface for ODO correction
MotoScan interface for checking and confirming firmware version MotoScan interface for informing
firmware progress in reinstallation
 
EQUIPMENT COMPONENT
 
- 01 Handheld with LCD and function control buttons
- 01 Data cable used to determine faults (CAN, K-line communication protocol)
- 01 Cable receiver signal and optical sensor
- 01 Cable check battery and generator
- 02 Jumper for reading fault code by MIL (for some kind of vehicles only)
- 01 12V/DC Power cable
- 01 220V/AC to 12V/DC power converter
- 01 Extendable cable for Yamaha
- 01 MOTOBOX - electrical accessory (an optional only and isn’t included of standard pack)
- 01 MT0006 LINK - data cable (an optional only and isn’t included of standard pack)
- 01 Accessory measure exhaust (an optional only and isn’t included of standard pack)
- 01 Update cable (an optional for 5.X model only and isn’t included with 4.X models)
- 01 CD video use guide and free MOTODATA software (you need to make REGISTRATION FILE HERE on your computer to make active code for using professional version)
- 01 Guide book
- 01 Hand cloth bag
 
DLC LOCATION ON THE VEHICLES & WIRING CONNECTION DIAGRAM
 
1. CONNECTING DLC ON THE VEHICLES
(THIS CONNECTION USED FOR READ/CLEAR FAULT CODE, RESET ECM, SHOW LIVE DATA AND ACTIVE ACTUATORS)
K: K-line; E: Negative battery; B: Positive Battery
a. PIAGGIO

 
b. HONDA

 
c. SYM
 


 
d. YAMAHA
- Mode 1:
 

 
Mode 2:
 
Step 1: Disconnect the connector between dashboard and ECU
Step 2: Connect the K wiring of cable to ECU diagnose connector
e. KYMCO
 

f. SUZUKI
 


 
2. CONNECTING WIRE ON SPECIAL FUNCIONS (CHECK BATTERY, GENERATOR):
 
3. CONNECTING WITH MOTOBOX
 
MOTOBOX2
UPDATE THE LATEST VERSION
 
The latest models: 4.8P and 5.8P updated 21/12/2016  icon
- All customers bought MOTOSCAN will be updated software and firmware is free (Example: add functions, add live parameters and add models of motorcycle manufacturer that you bought)
- All customers upgrade the next models will be paid via policy provision (Example: upgrade from MOTOSCAN 4Y/H/S, 4HY, 4HS to MOTOSCAN 4M and 5)
CLICK HERE FOR QUESTION & ANSWER
 
● SOME VIDEO CLIPS SUPPORT USER IN CHECKING & REPAIRING
 
Notes:
Present, the videos only support in Vietnamese language. However, MOTOSCAN English version are available for you now.

- Click here to view clip for checking injector mechanical (Support from từ MOTOSCAN 5.8)icon
- Click here to view clip for activating head lamp of YAMAHA (Support from MOTOSCAN 5.8)icon

- Click here to view clip for diagnosing fault position on electronic wiring diagram (Support from MOTOSCAN 5.8)

- Click here to view clip for diagnosing complex fault that MIL lamp does not indicate (Support from MOTOSCAN 5.7)

- Click here to view clip for adjusting odometer (Support from MOTOSCAN 5.7)


- Click here to view clip for functions & application range of MOTOSCAN

- Click here to view clip for checking fuel pressure & compression pressure of cylinders

- Click here to view clip for checking Air/Fuel ratio

- Click here to view clip for reading fault codes

- Click here to view clip for checking intake air temperature sensor

- Click here to view clip for checking engine coolant temperature sensor

- Click here to view clip for checking throttle position sensor

- Click here to view clip for studying live data

- Click here to view clip for actuator activation

- Click here to view clip for adjusting Air/Fuel ratio

- Click here to view clip for checking battery, generator, charger

- Click here to view clip connect MOTOSCAN to YAMAHA motorcycle

- Click here to view clip erasing fault code & reset ECU/ECM
 
- Click here to view clip lookup fault code

- Click here to view reading fault code by MIL
● RELEVANT DOCUMENTS
 
Answer & Question Consultation selection Why buy DTDAUTO products?
Product introduction Download guide book Product introduction
MOTOSCAN poster (size A0) MOTOSCAN poster (size A4)